What do you contractors pay for a copper ground bus bar? The kind you'd see on the wall of a comm. room. Let's say 12"(L) x 1-1/2"(W) x 1/4". I can't seem to find it in my RMS Means book. And even if I could, with the price of copper doing somersaults, I'd still have to ask. :roll:
Copper Bus Bar
- Thread starter bcorbin
- Start date
- Status
brian john
Senior Member
- Location
- Leesburg, VA
Contact your metal box supplier. Give them the specs., they'll give you the price.
anthony001
Member
Any supplier who deals with erico should be able to give you a price. you should be able to find what you need on their website. if you need a spec. type I just bought one from comstock telcom for about $350 but this was a few weeks back and a spec model.
comstocktelcom.com
erico.com
comstocktelcom.com
erico.com
brian john
Senior Member
- Location
- Leesburg, VA
READ MY POST
e57
Senior Member
- Location
- San Francisco, CA
~$40-50 is about right. Maybe a little less - depending on who you get it from. Solid hard drawn 99+% copper, drilled tapped and mounted on isolators. You might want to check the spec if there is one for what they want (Dimentions and material), and what they want it connected to and with what.
Often people who spec these want some heavy conductor to the electrode system. Last one I did was 250MCM to the main water four floors away. Graybar if you have an account might be a good place to locate one. If not.... (You'll pay through the nose!!!!) So otherwise... http://www.gtitech.net/products.htmhttp://www.gtitech.net/news2.htm
Often people who spec these want some heavy conductor to the electrode system. Last one I did was 250MCM to the main water four floors away. Graybar if you have an account might be a good place to locate one. If not.... (You'll pay through the nose!!!!) So otherwise... http://www.gtitech.net/products.htmhttp://www.gtitech.net/news2.htm
- Status