Cord strain-relief for ceiling-hung receptacles

Status
Not open for further replies.

LarryFine

Master Electrician Electric Contractor Richmond VA
Location
Henrico County, VA
Occupation
Electrical Contractor
Hey, guys, I went net-searching for strain reliefs, and all I could find was the knock-out-mounted straight and angle connectors with the mesh strain cable holders.

Where can I find info on strain relief for the other end of the cord, where the receptacle is, as well as the cord of the plug plugged into it. Also, code references if possible.
 
Last edited by a moderator:

iwire

Moderator
Staff member
Location
Massachusetts
LarryFine said:
Where can I find info on strain relief for the other end of the cord, where the receptacle is, as well as the cord of the plug plugged into it. Also, code references if possible.

Not sure what type your looking for.

I would look in a Hubbell Kellems Catalog. :smile:

Strain Relief
 

LarryFine

Master Electrician Electric Contractor Richmond VA
Location
Henrico County, VA
Occupation
Electrical Contractor
Bob, the Kellam I-Grip is exactly what I'm looking for.
smilie_t.gif
smilie_h.gif
smilie_a.gif
smilie_n.gif
smilie_x.gif
smilie_ausr.gif
 
Status
Not open for further replies.
Top