Crimp connectors 250 kmil alum

[ronball]

I have to pig tail off to 3 separate service from my continuos GEC to 6 " water pipe.
what type of non removal crimps can be used" can I crimp them together in a 500 kmil crimp connector, or is their any such thing
as a TEE crimp... Thx

 

[LarryFine]

The individual taps need not be irreversible. You can even use U-bolts.

 

[infinity]

Yes there are crimp style T taps or C taps but as Larry stated since you are installing bonding jumpers the connection to the GEC is not required to be irreversible. A split bolt listed for Aluminum conductors or Cu/Al if you jumpers are copper is all that's required.

 

[ronball]

My Inspector said they had to be irreversible. thats why I am looking for crimp crap!!!!

 

[infinity]

My Inspector said they had to be irreversible. thats why I am looking for crimp crap!!!!

Tell him that he's incorrect. The GEC has to be irreversible spliced, bonding jumpers do not. Here's one example of the difference between the two.

 

[busman]

It is not required to be irreversible, but I would use H-Taps listed for AL conductors.

Mark