Can anyone identify this horizontal Crouse Hinds panel? No markings. It is a 200amp panel. However, when solar was installed they put a 175 amp main on it which got fried because it was not mounted correctly by the installer as you can see in the picture. Of course, the installer is not being very helpful. It also damaged the bus bar so I am hoping to find a new bus bar or load center I could take the bus bar out of. We cut down the bus bar for now and eliminated two breakers and put the main on the adjacent tabs as a temporary solution, but would like to retrofit a Siemens or Murray. Would this be a possible and UL listed option?
I was going to take the Busbar out of a new Siemens load center and mount it horizontally. Would this work?
Here is a comparison of the Murray and Siemens I believe to be equivalent direct from siemens website:
https://mall.industry.siemens.com/goos/catalog/Pages/mmpdata.ashx?lang=en&MLFB1=US2:LW1224B1200&MLFB2=US2:SNW1224B1200&
I was going to take the Busbar out of a new Siemens load center and mount it horizontally. Would this work?
Here is a comparison of the Murray and Siemens I believe to be equivalent direct from siemens website:
https://mall.industry.siemens.com/goos/catalog/Pages/mmpdata.ashx?lang=en&MLFB1=US2:LW1224B1200&MLFB2=US2:SNW1224B1200&
Last edited:
