crouse hinds eys

[bobbymari]

Hello all, we have a 3" eys fitting which im trying to hunt down the tool for center threaded plug. The ones we normally use have just a 1/2" plug but this ones center plug is 1 1/2"x
1 1/2" square drive
Anyone know the name of the square shanked tool of this size or where to get?
Thanks in advance

 

[kwired]

Hello all, we have a 3" eys fitting which im trying to hunt down the tool for center threaded plug. The ones we normally use have just a 1/2" plug but this ones center plug is 1 1/2"x
1 1/2" square drive
Anyone know the name of the square shanked tool of this size or where to get?
Thanks in advance

There is such a thing as 1.5" drive ratchets, impact drivers, etc.

Probably not on the shelf at just any ol hardware store though.

 

[jmargolis79]

I have used a larger single barrel lug(about 1.5"square) upside down and then a pipe wrench.

 

[bobbymari]

I have used a larger single barrel lug(about 1.5"square) upside down and then a pipe wrench.

when someone says something and u slap ur forehead like why the hell didnt I think of that

 

[don_resqcapt19]

We just used a piece of steel bar stock and a wrench for the larger sizes.