CT wiring question

[OCPD]

I had a question about the CT wiring to the relay shown in the picture. I was wondering is there a reason to show the wiring swapped other than connecting the polarity to the polarity input of the relay.

 

[Hv&Lv]

That’s it. The 787 doesn’t show that cross that way.
The differential need to be wired that way.
700G? It looks like an SEL drawing.
That swap is where I see most errors in the IOP and IRT values
It’s in all the 87 relays

 

[OCPD]

That’s it. The 787 doesn’t show that cross that way.
The differential need to be wired that way.
700G? It looks like an SEL drawing.
That swap is where I see most errors in the IOP and IRT values
It’s in all the 87 relays

Yes, 700G

 

[LarryFine]

I think it's to make more obvious the opposing input and output CT polarities.

 

[Hv&Lv]

Here’s an example of the 787.
The cards are wired the same.
The cross is there also, just drawn differently