Custom Size Wire Trough

Status
Not open for further replies.
L

Lytchro24

Member
Location
Oklahoma City, OK
Occupation
Solar Power Procurement Manager
I'm looking for 48" long by 18" tall by 10" deep, N3R wiring trough, in order to accommodate an internal sleeve to separate line and load wires.

Is anyone aware of a manufacture that will custom make a UL listed N3R enclosure.

Thank you, Seth.
 
Lytchro24 said:
I'm looking for 48" long by 18" tall by 10" deep, N3R wiring trough, in order to accommodate an internal sleeve to separate line and load wires.

Is anyone aware of a manufacture that will custom make a UL listed N3R enclosure.

Thank you, Seth.
Click to expand...
We have had sheet metal shops make enclosures for us to our specs and drawings but if you're looking for UL listed custom made I don't know that you would want to pay for that.
Others on here may know of a source.
 
qcroanoke said:
We have had sheet metal shops make enclosures for us to our specs and drawings but if you're looking for UL listed custom made I don't know that you would want to pay for that.
Others on here may know of a source.
Click to expand...
A number of the sheet metal shops can provide the UL listing, and as I recall, it is about 20% premium over just the custom enclosure.
 
In our area we have a company that makes CT cabinets for 400 to 800 amp services that have have a sticker from an approved testing lab. Have seem them make a huge 8' long "l " shaped extension box with 2' side and a 4' opposite side to accommodate adding 6 additional 4" conduit runs. Custom made box did not have a sticker but they had the electrical inspector look at inside of it and approved it.
 
Status
Not open for further replies.
Top