Dc motor/controller issue

[cimber]

Right now I have a 1/8 hp dc gear motor. The brand name of motor is Stature. It is somewhat old but it works. It is 180 VDC and an rpm of 265.

Now I have a KBLC-19PM(MOD) w/ btb controller. Link below is a picture I took today. The Hp resistor says 120v .35 240v 1/30-1/20 1/15-1/10.

I currently have it hooked up to a 1/12 hp dc motor. And it works great.

My question is. How can I hook the new motor up and make it work with the controller that I already have?

Do I need to buy the right hp resistor for it? If so, which one do I need?

I do wanna plug this into the wall at my house.

Any other questions please just ask.

http://img245.imageshack.us/img245/4779/20101021163538314.jpg

 

[charlie b]

I am closing this thread, in accordance with the Forum?s rules. This Forum is for professional electricians, inspectors, engineers, and other members of the electrical industry. We are not permitted to provide ?how-to? assistance to a person who is not employed in this industry.