Good day all. I have a problem with installing a Delta RT 10KVA UPS. It shows error code "0×100" and shows error message "Input voltage out of range". In my country, Eswatini, the AC range is 220V~250V. The error code shown here is not listed in the trouble shooting. Please help.
Delta UPS TR 10KVA
- Thread starter Banele
- Start date
ron
Senior Member
- Location
- New York, 40.7514,-73.9925
Maybe take a look at the installation manual to see if there are settings to establish the nominal input voltage.
This is for the 3 phase models https://www.deltapowersolutions.com/en/mcis/5kva-20kva-ups-rt-series-downloads.php
This is for the 3 phase models https://www.deltapowersolutions.com/en/mcis/5kva-20kva-ups-rt-series-downloads.php
Choice_Gorilla
Senior Member
- Location
- New England
- Occupation
- Journeyman Electrician
What’s the actual voltage at the terminals at the unit?