Demo

[Alwayslearningelec]

Opinion wanted on approach. If you had a portion of a floor being fully demolished and renovated as shown in pic would you.

1. Just survey, trace and safe off and disconnect electrical circuits without removing every fixture/receptacle individually so they can be demolished/removed by demo company or laborers. I see not reason to remove each light/receptacle.

Sure there would be circuits in the construction area that might feed adjacent areas and one would have to modify/bridge those circuits.

 

[Buck Parrish]

Just survey, trace and safe off and disconnect electrical circuits without removing every fixture/receptacle individually so they can be demolished/ Recycled

That exam room may have a circuit going under the slab and then back up to the chair.