Different rated conductors in one enclosure

[MikeI]

I amcurrently designing the electrical system for a gantry crane we are refurbishing. There is a terminal box at each end of the festoon where 600V rated power & control conductors are transfered to flat cable for the festoon. They are routed through slotted panduit in the enclosures. I also have (1) 3-pair twisted, shielded cable (encoder) and (1) one-pair twisted shielded cable (load cell). These do not have any intermediate terminations between device and control cabinet. Can I route these cables through the same enclosures in solid wall panduit and satisfy the NEC?

 

[MikeI]

Ooops

Ooops

I forgot to include the the reason for starting this thread - the power and control conductors are 600V rated, the analog conductors are 30V rated.

 

[gadfly56]

I forgot to include the the reason for starting this thread - the power and control conductors are 600V rated, the analog conductors are 30V rated.

Belden makes tray cable listed for 600V and multi-pair shielded or unshielded. Start here