Difficulty of long pull through HDPE

[Ap6&$IWz]

Hello. Just wondering about the difficulty of pulling through HDPE conduit.

I've got a roughly 500' directionally bored 2" HDPE conduit to pull (3) #1 Cu through. Is this something that can be reasonably accomplished in one pull or should I break the pull up into two segments?

Thanks for your time and thoughts,
Alan

 

[ptonsparky]

Hello. Just wondering about the difficulty of pulling through HDPE conduit.

I've got a roughly 500' directionally bored 2" HDPE conduit to pull (3) #1 Cu through. Is this something that can be reasonably accomplished in one pull or should I break the pull up into two segments?

Thanks for your time and thoughts,
Alan

Easy.

You do have a puller or a couple healthy apprentice, correct?

We pulled 1000 feet of 2 Al USE a week or so ago. (Dodge Diesel)

 

[Ap6&$IWz]

Good to hear.

Yes, we will be using a tugger.

Thanks a lot for your response.

 

[Fulthrotl]

Hello. Just wondering about the difficulty of pulling through HDPE conduit.

I've got a roughly 500' directionally bored 2" HDPE conduit to pull (3) #1 Cu through. Is this something that can be reasonably accomplished in one pull or should I break the pull up into two segments?

Thanks for your time and thoughts,
Alan

.
simpull.

and mule tape.

you don't need lube.