Dryer plug
- Thread starter sjl2569
- Start date
- Status
- Location
- Lockport, IL
- Occupation
- Retired Electrical Engineer
Re: Dryer plug
It?s not in the NEC. I can?t speak for local codes.
It?s not in the NEC. I can?t speak for local codes.
jimwalker
Senior Member
- Location
- TAMPA FLORIDA
Re: Dryer plug
Unless you have a local amendment it's the same as anystate. It can be any height,most prefer it at about 3ft so they dont see it.
Unless you have a local amendment it's the same as anystate. It can be any height,most prefer it at about 3ft so they dont see it.
al hildenbrand
Senior Member
- Location
- Minnesota
- Occupation
- Electrical Contractor, Electrical Consultant, Electrical Engineer
Re: Dryer plug
Jim, the local differences are interesting. The most common placement, in my experience, is 4', just over the top of the machine. The exception being the finely appointed laundry room in more expensive "designer" settings where the plug is desired out of sight.
bill addiss
Senior Member
Re: Dryer plug
Bill
Same here Al. It's what I'm used to seeing, and decorating concerns aside I always felt it should be readily accessible.
Bill
jimwalker
Senior Member
- Location
- TAMPA FLORIDA
Re: Dryer plug
I do see many at the 4ft height but it really is ugly to see.No real good reason to have it insite.
GC down here get very picky over things like this.Almost none will go for a panel in a hall or bedroom.And even had one that wouldn't let me put a panel in the laundry room.On houses other than track homes i try to walk everything room by room for location and height.Saves problems
I do see many at the 4ft height but it really is ugly to see.No real good reason to have it insite.
GC down here get very picky over things like this.Almost none will go for a panel in a hall or bedroom.And even had one that wouldn't let me put a panel in the laundry room.On houses other than track homes i try to walk everything room by room for location and height.Saves problems
- Status