gbarone
Member
- Location
- Southampton, PA
I'm trying to repair a dumbwaiter, after replacing the reversing contactor, the motor will still not reverse, or go down. It stays in the forward or up direction.Any ideas?
Five and eight. But I would not expect to see numbers of the leads on the contactor, more likley different colors.... Single phase will reverse the two start winding leads in relationship to the run windings. (Danged if I can remember the #s right now. Getting old sucks.)
Are you saying the switch that controls the dumb waiter is 24V?Thanks for your response, what about 24 volts.
What do you mean by this? Surely the motor and circuit to it are not 24V, just the controls, right?The system runs off a 24 volt transformer. Reversing contactor, over-current protection, and switches.