Eaton BR Panel

[CaballoRanch]

Will a type BR 200 amp circuit breaker fit in a Eaton-BR-16-Circuit-200-Amp-Main-Breaker-Plug-On-Neutral-Load-Center/1000551245..?
I need to install a 200 amp 2-pole (not the main), a 100 amp 2-pole and a 60 amp 2-pole circuit breaker in this panel

 

[Electromatic]

Judging by this catalog:

https://images.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/vol01_tab01.pdf

there is no BR2200, but they do make a BJ2200 that takes four 1" spaces.

 

[hillbilly1]

The buss may only be rated 100 or 125 amp max, even though some factory assemblies use that method as a main.

 

[hillbilly1]

Does the panel have sub feed lugs? Usually a 200 amp panel with that few spaces does. You are still limited to 200 amps, I’m Assuming you are feeding another panel no problem with feeding the other loads off that buss.