vinod
Senior Member
- Location
- Saudi Arabia
Secondary neutral point (X0) is grounded for an Isolation transformer. This transformer is feeding to an Electrical Heat Tracing (EHT) system panel. This system is controlled by Power Line Interface (PLI) unit. PLI is measuring the Temperature and continuity of the circuits by the configuration of each circuit ID. eg 60-01,60-02,60-03,etc. The system is manufactured by TYCO THERMAL CONTROLS.
My questions are,
1. Can I install another EHT panel with same circuit configuration (60-01, 60-02, 60-03, etc)?
2. Will any problem create, if transformer neutral in grounded condition?
My questions are,
1. Can I install another EHT panel with same circuit configuration (60-01, 60-02, 60-03, etc)?
2. Will any problem create, if transformer neutral in grounded condition?