Electrical load calulation for tanning beds.

Status
Not open for further replies.
I worked on several tanning salons for a big chain and there is absolutely no diversity you can take. The load on the ones I used to work on was somewhere around 10.4 kW per bed. They would actually design their entire store on what their electrical service could handle.
 
I don't know if a tanning bed is a continuous load or not. But I would call the manufacturer and find out.
 
edward said:
I don't know if a tanning bed is a continuous load or not. But I would call the manufacturer and find out.
Click to expand...

They are completely filled with lights but they dont run for more then 3 hours. They usually run for 5-15 mins, and then a fan runs for another 10 mins after while they cool down. If you took them at 125% it would probably exceed the MOCP.
 
Guns don't kill people, people kill people.



Melanoma?

Tanning beds don't kill people, electricians that hook up tanning beds kill people.



as you were.
 
ritelec said:
Guns don't kill people, people kill people.



Melanoma?

Tanning beds don't kill people, electricians that hook up tanning beds kill people.



as you were.
Click to expand...
Pursuit of happiness includes choosing how you will die... even if you don't know it at the time. :blink:
 
Status
Not open for further replies.
Top