Greetings group;
Have any of you done a swap out of track heads, on a two circuit track,
with 'Electronic Low Voltage' LED track heads, that are of course 'Dimmable'
And got it to dim smoothly out issues?
A typical existing 120V 2-circuit track with halogen track heads, uses each circuit for a different dimmer;
Now this would dim fine on traditional dimmers.
The customer picked out some WAC Charge-8010 and they have a nice dimmer compatibility chart,
That points to using Lutron, which says they dont like shared neutral dimming:
There is also Legrand Harmony and a leviton sure slide listed that dont report issues
Just wanting to see if there are any recent experiences with this?
Thanks
Have any of you done a swap out of track heads, on a two circuit track,
with 'Electronic Low Voltage' LED track heads, that are of course 'Dimmable'
And got it to dim smoothly out issues?
A typical existing 120V 2-circuit track with halogen track heads, uses each circuit for a different dimmer;
Now this would dim fine on traditional dimmers.
The customer picked out some WAC Charge-8010 and they have a nice dimmer compatibility chart,
That points to using Lutron, which says they dont like shared neutral dimming:
There is also Legrand Harmony and a leviton sure slide listed that dont report issues
Just wanting to see if there are any recent experiences with this?
Thanks