eddierayrefeld
Member
ARTICLE 430.28(1)
SCENERIO
MY TAP IS IN A NEMA 4 ENCLOSURE, LESS THAN 10FT, AND IS NOT FOR A FIELD INSTALLATION.
I HAVE A 1000 AMP BREAKER SERVICING THIS PANEL.
IF I RUN A TAP AFTER THIS BREAKER AM I REQUIRED BY CODE TO PROTECT IT WITH AN OVER CURRENT DEVICE ON THE LINE SIDE OF THE TAP CONDUCTOR, MAKING SURE THAT THE RATING OR SETTING NEVER EXCEED A 1000 PERCENT OF THE TAP CONDUCTOR AMPACITY???
SCENERIO
MY TAP IS IN A NEMA 4 ENCLOSURE, LESS THAN 10FT, AND IS NOT FOR A FIELD INSTALLATION.
I HAVE A 1000 AMP BREAKER SERVICING THIS PANEL.
IF I RUN A TAP AFTER THIS BREAKER AM I REQUIRED BY CODE TO PROTECT IT WITH AN OVER CURRENT DEVICE ON THE LINE SIDE OF THE TAP CONDUCTOR, MAKING SURE THAT THE RATING OR SETTING NEVER EXCEED A 1000 PERCENT OF THE TAP CONDUCTOR AMPACITY???