First pool job
- Thread starter nizak
- Start date
- Status
Type of pool? The review books you get in CEU classes are great for checking your required grounding, the illustrations really speed things up
Last edited:
krisinjersey
Senior Member
- Location
- Hackettstown, New Jersey
Not as hard as you think.
Not as hard as you think.
Give me some more specifics on the pool and equipment and I'll point you in the right direction. I've done over 100 pools up here and most of them are monsters with multiple pumps, control systems, and lighting. This has really made itself my niche.
Not as hard as you think.
Give me some more specifics on the pool and equipment and I'll point you in the right direction. I've done over 100 pools up here and most of them are monsters with multiple pumps, control systems, and lighting. This has really made itself my niche.
- Location
- Massachusetts
We have a few large gunnite pools starting soon an I am going to do my best to take pictures of the whole process from start to finish starting with the bonding of the steel grid to the completion of the pump room or pad.
- Location
- New Jersey
- Occupation
- Journeyman Electrician
Mike's download is a good start. Given the complexity of pool wiring I wondered if there's a book that explains pools with great detail. Seems like a valuable tool for both installers and inspectors. Just read somewhere that an inspector in NJ was requiring the installation of 4 ground rods for a built in pool as part of the equipotential bonding grid. :roll:
I have heard of that before Installing at each corner of the pool an also attached to the grid but we haven't run into that problem as of yet.
- Status