ftl55w cfl to LED 0-10v dimming

[Krusscher]

I am trying to find a good retro to change a 3 lamp ftl55 cfl fixture to LED. It is a 30" suspended globe fixture that is a pain to get to and replace ballast/lamps. There are plenty of type B lamps but I can't find anything dimmable.

 

[ptonsparky]

Field modify the fixture if it’s your own and the Boss wants that one, or get a new fixture.

I had to modify our MB vent/light.

 

[Krusscher]

Field modify the fixture if it’s your own and the Boss wants that one, or get a new fixture.

I had to modify our MB vent/light.

I am trying to figure out how to modify it and still have it dimmable. it has like an 8in hole in the top of it where the lamps/ballast go down into so I am kind of limited. Unfortunately I think new fixtures are out of the question because there are something like 15 of these fixtures and they are not cheap. I have been trying to find a type c lamp with a 2g11 base, or really any CFL type c replacement, with no luck.

 

[synchro]

Is there anything in the info at the link below that might be helpful?

https://lightingsupply.com/cdn/shop/files/GC-36710.pdf?v=769300313371380685

 

[Tulsa Electrician]

with a 2g11 base, or really any CFL type c replacement, with no luck.
Something like this

 

[Krusscher]

with a 2g11 base, or really any CFL type c replacement, with no luck.
Something like this

yeah a type-A might be what I have to settle for but I was really hoping to take the ballast out of the equation as well. Unfortunately if I go that way I am not going to be able to talk myself out of using up the stock of fluorescent lamps that we have before switching to LED

 

[Krusscher]

Is there anything in the info at the link below that might be helpful?

https://lightingsupply.com/cdn/shop/files/GC-36710.pdf?v=769300313371380685

this does seem like it will work! Thanks!