gar door opener circuit
- Thread starter ver
- Start date
- Status
Re: gar door opener circuit
Here we sperate g.d from the garage. and can put up to 2 g.d. on 1 circuit (by 210.23 (A)(2)Utilization Equipment) and yes I know that would mean that the opener would be <7.5 amp but thats what we go by and the openers are never there at rough in to check
Here we sperate g.d from the garage. and can put up to 2 g.d. on 1 circuit (by 210.23 (A)(2)Utilization Equipment) and yes I know that would mean that the opener would be <7.5 amp but thats what we go by and the openers are never there at rough in to check
ryan_618
Senior Member
- Location
- Salt Lake City, Utah
Re: gar door opener circuit
I do not require it.
I do not require it.
johndeereman
Member
Re: gar door opener circuit
Here in our arae it is not required but myself I run a sperate circuit & put two openers on this curcuit just to avoid triping if they were to open both doors at the same time. Like wyatt stated in most houses the openers are not installed to see the name plate rating & in some cases they are not installed @ the final.
Here in our arae it is not required but myself I run a sperate circuit & put two openers on this curcuit just to avoid triping if they were to open both doors at the same time. Like wyatt stated in most houses the openers are not installed to see the name plate rating & in some cases they are not installed @ the final.
- Status