Gas ventless fireplace with a blower.

[J.P.]

Does a gas ventless fireplace with a blower typically require it's own circuit?

I dont have have the fireplace or any specific info so please just generalize.

 

[GoldDigger]

Does a gas ventless fireplace with a blower typically require it's own circuit?

I dont have have the fireplace or any specific info so please just generalize.

IMHO, no, it does not.
Is that general enough for you?
It could not, however, be connected to an existing SABC if that is all you have available.

 

[J.P.]

Sabc? Something branch circuit I'm assuming.

 

[GoldDigger]

Small Appliance Branch Circuit which may be what is feeding the receptacles in a kitchen or dining room. Such a circuit is not allowed to feed fixed loads with certain limited exceptions.

It depends on where the stove will be installed and what circuits are available in the area.

Tapatalk!

 

[qcroanoke]

Small Appliance Branch Circuit which may be what is feeding the receptacles in a kitchen or dining room. Such a circuit is not allowed to feed fixed loads with certain limited exceptions.

It depends on where the stove will be installed and what circuits are available in the area.

Tapatalk!

And who's watching.....

 

[J.P.]

And who's watching.....

Santa is always watching!

Thank guys. It's out in the living room and there are two circuits there. I'll use the one that isn't hooked to the entertainment center.

I didn't have any idea how big the blower in one of those units was. I'm guessing pretty small now.