aelec84
Member
- Location
- Los Angeles
- Occupation
- Electrical Engineer
forum,
I have (2) parallel sets of 400kCMIL copper conductors and the GEC is connected to common ground bus and it is extending it to other electrodes. I believe equivalent area has to be considered which would be 800 kCMIL requiring 2/0 gec. Is this right? Thanks,
I have (2) parallel sets of 400kCMIL copper conductors and the GEC is connected to common ground bus and it is extending it to other electrodes. I believe equivalent area has to be considered which would be 800 kCMIL requiring 2/0 gec. Is this right? Thanks,
