VirutalElectrician
Senior Member
- Location
- Mpls, MN
- Occupation
- Sparky - Trying to be retired
Customer just installed new appliances and they are tripping the GFCI.
I suggested they file a repair order with place of purchase and this is what they sent back:
Hello,
I received the service request below for the Frigidaire Refrigerator. For this issue we received new direction from the Department of Labor and Industry's Chief Electrical Inspector about appliances tripping the breaker.
State’s protocol:
GFCI issues can be documented here: https://www.nema.org/membership/products/gfci-unwanted-tripping-report
AFCI issues can be documented here: https://www.afcisafety.org/
I suggested they file a repair order with place of purchase and this is what they sent back:
Hello,
I received the service request below for the Frigidaire Refrigerator. For this issue we received new direction from the Department of Labor and Industry's Chief Electrical Inspector about appliances tripping the breaker.
State’s protocol:
- GFCI breakers are installed and inspected for NEC compliance.
- If after the appliance is installed, the appliance is shown to not be compatible with the GFCI protection, the contractor or homeowner will submit a NEMA incident report, and the GFCI breaker can be removed.
GFCI issues can be documented here: https://www.nema.org/membership/products/gfci-unwanted-tripping-report
AFCI issues can be documented here: https://www.afcisafety.org/
- The contractor or homeowner provides proof, which is uploaded to the permit, that shows a NEMA incident report was submitted for an appliance at a specific address. (This could be a screenshot of the report on their webpage)
- If the breaker or appliance manufacturers provide a solution - it is up to the contractor/homeowner to make the necessary repairs and provide GFCI protection.