Gfi Breakers

[sd4524]

I would like to install 2 pole gfi breakers for indoor shower (waterfall pump, heat )circuits. The circuits are 20a 208v. The motors do not have a neutral connection. Will the breakers trip without any neutral. I don't think there should be any problems but just want to be sure.

 

[brantmacga]

yeh it'll work.

 

[Chamuit]

I have hooked up 2-pole jetted/heated tubs that do not use a neutral to 2-pole GFCI breakers. Per installation instructions.

 

[Dennis Alwon]

I would like to install 2 pole gfi breakers for indoor shower (waterfall pump, heat )circuits. The circuits are 20a 208v. The motors do not have a neutral connection. Will the breakers trip without any neutral. I don't think there should be any problems but just want to be sure.

Many hot tubs and spa units use to come with no required neutral and a GFCI was installed. It will function properly.

 

[JohnJ0906]

You will need to connect the neutral pigtail from the GFCI breaker to the neutral bar, but a load neutral is not necessary.