Grommet

[mstrlucky74]

So a little change and more info from last post.
We will have Access to get behind 3/4" KO. Will be having a cAble with .4 OD going through.
Is there and type of grommet/bushing/connecter that's weather resistant that would work with 3/4" KO and create seal around cable going through? Need as low profile as possible . Thanks

 

[infinity]

Would a cord grip connector work?

 

[LarryFine]

Halex 3/4 in. Strain Relief Cord Connectors with Gland Nut (2-Pack) 21694 - The Home Depot

Enjoy the Halex 3/4 in. Strain Relief Cord Connectors with Gland Nut (2-Pack) 21694, hex gland nut fix S, SO, ST, SJ, SJO and SJT cord to steel outlet boxes or similar enclosures at The Home Depot

www.homedepot.com

Halex 3/4 in. Service Entrance (SE) Water-Tight Uf Connector 90662 - The Home Depot

Complete all your hardest work easily by selecting this wonderful Halex Service Entrance (SE) Water-Tight Uf Connector. Die cast of high-strength zinc alloy.

www.homedepot.com

 

[mstrlucky74]

Thanks...so how does it tighten around the cable?

 

[retirede]

Thanks...so how does it tighten around the cable?

The fitting body and rubber insert have a matching taper. As you tighten the gland, the tapers compress the rubber on the cable.

 

[LarryFine]

What he said. They also make non-metallic ones if you prefer.

Arlington Industries 3/4 in. Strain Relief Cord Connector (Single-Pack) LPCG757-1 - The Home Depot

Visit the Home Depot to buy ARLINGTON INDUSTRIES, INC 3/4 in. Strain Relief Cord Connector LPCG757-1

www.homedepot.com