• We will be performing upgrades on the forums and server over the weekend. The forums may be unavailable multiple times for up to an hour each. Thank you for your patience and understanding as we work to make the forums even better.

Hanging a 2 chain linear fixture level

Status
Not open for further replies.
M

Mare Simpson

New User
Location
Cumming, GA
Occupation
Retired
If someone can help me, I’d greatly appreciate. We are in new construction, and the electrician half hung our new light fixture. My husband has hung fixtures, but never one with 2 chains. It’s RH Odeon linear fixture. It has a plate with 2 chains, and one has wiring. The ceiling plate is level. The electrician threaded the wire through the one chain. Both chains have equal links, but the wire side is hanging half a link short. It is possible that he threaded it without it being perfectly straight. Would that make a difference? Any suggestions?
 
Little Bill

Little Bill

Moderator
Staff member
Location
Tennessee NEC:2017
Occupation
Semi-Retired Electrician
I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals
* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.
 
Status
Not open for further replies.
Top