Help wiring a motorized ball valve...

[EEEC]

How do I wire for 120V operation? Red to line and black to neutral? Thanks in advance!

Form 110VAC To 240VAC Wide Range Working Voltage Design, Working At Both 50Hz and 60Hz, CR5-02 Five Wires Position Feedback Electric Ball Valve

 

[zbang]

Looks like it... assuming that the valve will accept 120vac. Is this a NRTL-listed unit?

 

[EEEC]

Looks like it... assuming that the valve will accept 120vac. Is this a NRTL-listed unit?

I'm not sure about the NRTL listing but the sticker says: AC110-230V

 

[zbang]

Sticker would say that it's UL or something listed, I ask because that's obviously not a US-made unit. Might try it on the bench instead of installing it first.

 

[EEEC]

Oh, yeah. Bench testing was definitely part of the plan. I just wanted to run it by others before doing it so I didn't fry the thing.

The bench test was successful.

Thanks, zbang!

 

[Todd0x1]

Looks like it... assuming that the valve will accept 120vac. Is this a NRTL-listed unit?

I know these valves, they are not listed. If I were determined to use one, I would get the low voltage version and power it with a listed powersupply.