HID lighting IN Sheetrock Soffits. Commercial-Industrial

Status
Not open for further replies.
F

Fordean

Senior Member
Location
New Jersey
Occupation
Electrical Contractor
Ok, On a job. Simple Lamp changing. But maintainance. Have all different lamps in fixture. You can not access Ballast compartments. To read Lamp type (ANSI CODE) Etc. The Lamp Trims. Have labels. But dont trust them since some say different type.

Why have fixtures you can't access ballasts. Without. Wanting to jump off top floor.
 
J

John120/240

Senior Member
Location
Olathe, Kansas
When using Halo or Juno brand can lights: You remove the trim, then take out three screws

around the inside circumfrence of the can to get to the wiring compartment. Are there any

drawings that might list luminaire type or model number ?
 
Status
Not open for further replies.
Top