Hilti TE22

[cosmo]

I just got a used Hilti TE22 without an instructoin manual and was wondering if anyone could give me any details on its use. I have searched the Hilti website and cannot find any info. I have very limited use of rotary hammers in my career and am not familiar with all the capabilities(size of hole, drill mode hammer mode and things like that)

Thanks

 

[mkoloj]

Doesn't look like Hilti has the manual published here:
http://www.us.hilti.com/holus/modules/techlib/teli_results.jsp?type=instruction_manuals&subtype=drilling_demolition_tools

I did happen to get my hands on a parts list and schematic for it though:
http://www.us.hilti.com/data/techlib/docs/tool_schematics/drilling/TE22_X.pdf

Looks to me like it is discontinued and you might have a tough time finding parts or repair if and when the time comes.

 

[brian john]

if it is not broken or has not been abused plug it in and go to town, I have several TE-22 I am sure the manual was never read by one of my employees.

 

[celtic]

I am sure the manual was never read by one of my employees.

I have a broken TE-22 sitting around somewhere...I'm sure the manual is in "factory condition"

 

[LarryFine]

Most rotary hammers require that the bit shanks be regularly greased.

 

[mkoloj]

I have a broken TE-22 sitting around somewhere...I'm sure the manual is in "factory condition"

I'll start the bidding at $6.

 

[celtic]

I'll start the bidding at $6.

LOL.

It'll take more than 6 bucks to get me outta my chair ....
Pies start at $10 here: http://www.deliciousorchardsnj.com ...and I need some pie!



If I find the drill...and a manual, I'll PM you for an address to send it to

 

[mkoloj]

LOL.

It'll take more than 6 bucks to get me outta my chair ....
Pies start at $10 here: http://www.deliciousorchardsnj.com ...and I need some pie!



If I find the drill...and a manual, I'll PM you for an address to send it to

I go and tell you that you can't find the manual or parts and celtic is about to send you a manual and a parts donation.

 

[celtic]

I go and tell you that you can't find the manual or parts and celtic is about to send you a manual and a parts donation.

Easy now cowboy...the manual will be sent to parts unknown ~ the drill is heading out to a repair shop.
This particular TE-22 is one of the models that has an all metal housing and can take a serious beating (but apparently not dust ?)

 

[mkoloj]

My bad killer.

 

[celtic]

My bad killer.

No harm done

 

[Pierre C Belarge]

Celtic
You giving away tools?

What other tools are you giving away??? :grin:

 

[mkoloj]

Celtic
You giving away tools?

What other tools are you giving away??? :grin:

Forget about it, I have dibs.

 

[sparky_magoo]

I have been using my TE-22 for over twenty years. It is still in great shape. Of course, I never loan out my tools.

 

[celtic]

Celtic
You giving away tools?

What other tools are you giving away??? :grin:

I have a few buckets of ID-ten-T's ....take as many as you need

 

[480sparky]

I have a few buckets of ID-ten-T's ....take as many as you need

Will those work with my wire stretcher? :grin:

 

[celtic]

Will those work with my wire stretcher? :grin:

Ony if attached with a proper sized hen weigh

 

[480sparky]

Ony if attached with a proper sized hen weigh

What about your hammer for?

 

[celtic]

What about your hammer for?

Next to the seal tight couplings...

 

[480sparky]

Next to the seal tight couplings...

Right above the pile of threaded EMT and below the bucket of steam?