You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
How high?
- Thread starter freynolds
- Start date
- Status
- Not open for further replies.
fc
Senior Member
- Location
- New Jersey
freynolds said:Question is how high does fence to protect power company equipment on ground have to be. 600 volt or better?
Answer to how many risers in stairwell for 3-way switch? 6 risers.
You will find it in 110.31.
Answer to how many risers in stairwll for a "3 way switch" is 6.
Where does it require a 3way?
lowryder88h
Senior Member
- Location
- Massachusetts
sw's
sw's
Look at 210.70 (2) (c) "at each floor level" sounds like 3-ways to me.
sw's
Look at 210.70 (2) (c) "at each floor level" sounds like 3-ways to me.
fc
Senior Member
- Location
- New Jersey
lowryder88h said:Look at 210.70 (2) (c) "at each floor level" sounds like 3-ways to me.
It sounds like it could be and I am sure I would like it that way but it does not have to be a 3-way. It could be a single pole or a 4 way or a 3 way. It just has to have a switch. IMO.
- Status
- Not open for further replies.