How to make a sharp turn with 2/0 wire

[Cgmaster1]

I have to run some 2/0 wire through 2" conduit the way it is run it hs to make a sharp u turn which is and LB then a short about 3" long nipple then through another LB.

I have done a decent amount of electrical work but but wondering is there an easy way to do this.

I've been trying to find something like a Polaris connector that turns 90° for the output wire.

 

[ActionDave]

I am closing this thread in accordance with forum rules. If you are not an electrician, we are not permitted to assist you in performing your own electrical installation or maintenance work.

If installing stuff is not your occupation, then we can’t help you install stuff. You would have had to agree with that rule during the process of registering on the forum.

The reason is that the forum’s owner does not want a person to get an answer to the question they asked, but not get answers to the dozens of other questions they should have asked and were unaware they needed to ask. An EE is less of a risk in that category. Mike Holt doesn’t want anyone to get injured by any incidents related to electrical installations. But he also doesn’t want to be sued by the injured party’s relatives on the basis of him not telling you enough to keep you safe.