How to wire and Join Warming/Heating Cable

[murihikukid]

Hi..I am in New Zealand and I desparately need to know some facts about how to join "Warming/Heating Cable" before I actually buy the cable from overseas...
I realise that the cable comes in different wiring configuration IE Single Conductor and dual Conductor.. but putting this aside can somebody please give me advice on how to divide/cut and then join the cable so it can easily come apart and how best to do this ..can it be done by relatively inexpensive off the shelf connectors....
Also
Any information on attaching a non warming cable end (with the 3 pin plug and Thermostat on it) to the actual heating cable and also how to terminate the Warmer Cable at the end of it ....
I would be sincerely grateful for any information...

Thankyou
Ron
New Zealand

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.