ILCEDIT Lighting Control

Learn the NEC with Mike Holt now!
Status
Not open for further replies.
J

Jon42574

Member
Location
Calafornia
Occupation
Electrician
Does anyone on here have any experience with Ilcedit Level 2 software? The system was installed in the mid 90's by ILC Enercon which is no longer in business and the timers are all out of sink. The system consists of momentary contact switches and 277 volt relays fed through a circuit board with RS232 communication and what appears to be DOS programming. Any help would be appreciated
 
Never heard of it but sometimes the best thing to do is to not throw good money after bad and just get rid of it. DOS programming? Good luck finding anything that will do that any more and also, good luck finding a PC with an RS232 port if you did.
 
Status
Not open for further replies.
Top