Weekend Worrier
New member
- Location
- Nashville, TN
I’m finishing out my basement adding lights and fans to the ceiling. At the rough in inspection, the inspector said I needed neutrals in my switch legs. This confused me, since the wires I pulled will have neutrals for each switch in the box.
I drew up the schematic as the wires I pulled will be trimmed out. I ran it by a buddy who owns an electrician company, and he said it looks fine.
I’d welcome insights from folks here. Am I missing something?
The schematic does not show ground wires, and the 14/3 switch and wire can be ignored for this purpose since it was not at issue with the inspector.
Sorry about the orientation being 90 degrees off.
I drew up the schematic as the wires I pulled will be trimmed out. I ran it by a buddy who owns an electrician company, and he said it looks fine.
I’d welcome insights from folks here. Am I missing something?
The schematic does not show ground wires, and the 14/3 switch and wire can be ignored for this purpose since it was not at issue with the inspector.
Sorry about the orientation being 90 degrees off.
