Installation of Radar Gauge

[Ainsley Whyte]

I am installing a conical antenna Radar Gauge with a type incline flange of 4 degree, for a tank that is 32 feet in height.
the question is how far from the tank shell is the minimum distance to install .

 

[synchro]

The manufacturer of the gauge should provide installation guidelines.
For example, on page 13 of this document they require a minimum distance of 0.6 meters (2.0 feet) from the tank wall.

https://www.emerson.com/documents/automation/manual-tankradar-pro-rosemount-en-80758.pdf#page=13

 

[Ainsley Whyte]

The manufacturer of the gauge should provide installation guidelines.
For example, on page 13 of this document they require a minimum distance of 0.6 meters (2.0 feet) from the tank wall.

https://www.emerson.com/documents/automation/manual-tankradar-pro-rosemount-en-80758.pdf#page=13

thanks my friend, it is a emerson type cone flange size is 8 inch incline at an angle of like i said 4 degree. i was thinking similar range you have provided