victor.cherkashi
Senior Member
- Location
- NYC, NY
I encountered an installation that doesn't look correct for me.
See attached diagram and picture below.
1/0 taps should be 3/0. If I replace 1/0 with 3/0 the problem solved? J
Is anything else I overlooked?
What section regulates interconnection between parallel conductors and tap at the same time?
If pictures are not visible you can see them in below links:
https://drive.google.com/open?id=193ckraGO9EcvNMJV0a3BJphnpy9TxMSO
https://drive.google.com/open?id=11iXUVRPdCLI3Ars3txsN2InKGM5eftKl
View attachment ELECT-1-1-E-401.pdf
See attached diagram and picture below.
1/0 taps should be 3/0. If I replace 1/0 with 3/0 the problem solved? J
Is anything else I overlooked?
What section regulates interconnection between parallel conductors and tap at the same time?
If pictures are not visible you can see them in below links:
https://drive.google.com/open?id=193ckraGO9EcvNMJV0a3BJphnpy9TxMSO
https://drive.google.com/open?id=11iXUVRPdCLI3Ars3txsN2InKGM5eftKl
View attachment ELECT-1-1-E-401.pdf