is a CT can considered a panelboard?

Status
Not open for further replies.
G

gsstaley@sbcglobal.net

Member
Location
Houston
If I'm installing a transfer switch on an existing service, can I route my service conductors to the XFR switch and my feeders back into the same CT can (separate conduits of course) before entering the bldg switchgear? If the CT can is considered a panelboard, this should be ok. If considered a raceway then NO.

Thoughts please
 
It is not a panelboard. Look at the article 100 definition. As the name CT cabinet implies I would call it a cabinet under Article 312.
 
gsstaley@sbcglobal.net said:
If I'm installing a transfer switch on an existing service, can I route my service conductors to the XFR switch and my feeders back into the same CT can (separate conduits of course) before entering the bldg switchgear? If the CT can is considered a panelboard, this should be ok. If considered a raceway then NO.

Thoughts please
Click to expand...
Ill be you a Reuben the POCO isnt going to like that.....
 
Status
Not open for further replies.
Top