Is Sample Problem Wrong in Illustrated Guide to PV Systems - Max Current Calculation

Status
Not open for further replies.
B

bsisco

New member
The sample problems on page 264 of this guide are not applying the additional 1.25 (690.8.(B)(1)). I believe the calculation should be :

Module Isc X 1.25 X 1.25 (as specified on page 262)

But the sample problems are calculating max current as : Module Isc x 1.25

I thought I understood this and am I taking the NABCEP test tomorrow. Can anyone confirm that the sample problems are wrong?

Thanks
 
Status
Not open for further replies.
Top