dhalleron
Senior Member
- Location
- Louisville, KY
- Occupation
- Master Electrician/Senior Fire Alarm Technician
Not my best work. A panel change I did today on Sunday because I am a weekend warrior electrician. I will probably change this before inspection. Yes there is a kink in the Sealtite. I had a dumb attack and tried to offset over because there were no 1/2" KOs straight up. I had a piece of emt with me but no bender.
The LB is metallic, the Sealtite is non-metallic. There is a 10/2 with ground Romex inside.
Aside from the Romex being in what could be considered a wet location, is this wrong?
Should this be an all metallic or all non-metallic installation?

The LB is metallic, the Sealtite is non-metallic. There is a 10/2 with ground Romex inside.
Aside from the Romex being in what could be considered a wet location, is this wrong?
Should this be an all metallic or all non-metallic installation?
