Labeler question
- Thread starter gmail
- Start date
- Status
bkludecke
Senior Member
- Location
- Big Bear Lake, CA
- Occupation
- Retired Electrical Contractor
We really like the Brother P-Touch (w/black on clear tape), but I'm usually stuck with my Sharpie.
Bob on the left coast.
Bob on the left coast.
zog
Senior Member
- Location
- Charlotte, NC
Brady still seems to be the best
I am having problems with my Bradt Idxpert printer.
Seems the cartridges go bad if not used soon after opened.
I have been having print quality problems especially with wide labels with a large font. The black thermal transfer ribbon seems to hang up and not advance with the label and leaves splochy text.
No problem with a brand new cartridge.
When this printer needs to be replaced it may be with a Panduit Panther LS8.
The problem is that the Brady will print on lables 1-1/2" wide and the Panther only 1" wide.
Tim
Seems the cartridges go bad if not used soon after opened.
I have been having print quality problems especially with wide labels with a large font. The black thermal transfer ribbon seems to hang up and not advance with the label and leaves splochy text.
No problem with a brand new cartridge.
When this printer needs to be replaced it may be with a Panduit Panther LS8.
The problem is that the Brady will print on lables 1-1/2" wide and the Panther only 1" wide.
Tim
- Status