Landing copper bond wire

[Wrongway]

If using a subpanel to run a new ac circuit and the one bonding terminal bar is full. Can I land the copper bond wire on the neutral terminal bar? I have seen some panels that only have one terminal bar for both neutral and bonding. Thanks Rick

 

[Dennis Alwon]

Rick it seems like you are an a/c guy and not an electrician. We are not allowed to help you in this case. It really depends whether you can hook the equipment grounding conductor to the neutral bar as sometimes you can and sometimes you can't. Please get a qualified person to do this.

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.