Im looking for a link that I think Ive seen here before.Customer wants receptacles throughout mulch/shrub beds but doesnt want wood stakes used.Ive seen a drive in metal,square shaped post with a 1/2 inch hub at top with a junction cover on the side.Its made to thread a light on the top but I thought I could cap off the top and install a duplex receptacle where the junction cover goes.Anybody know the link or something else that might work. Ross
landscape lighting drive in post.
- Thread starter canadian
- Start date
- Status
dcl34769
Senior Member
- Location
- saint cloud,fl
A
a.wayne3@verizon.net
Guest
Re: landscape lighting drive in post.
I call them rocket posts.Made from metal or plastic 1/2 in hub on top,and a bell box would work nicely for a receptacle
I call them rocket posts.Made from metal or plastic 1/2 in hub on top,and a bell box would work nicely for a receptacle
G
Guest
Guest
goldstar
Senior Member
- Location
- New Jersey
- Occupation
- Electrical Contractor
Re: landscape lighting drive in post.
Arlington makes a number of different types of plastic posts including ones that you can properly terminate PVC or UF directly into. They have a website www.aifittings.com, you can check them out there. The link that DCL posted is the one I was thinking about.
[ November 18, 2003, 07:28 AM: Message edited by: goldstar ]
Arlington makes a number of different types of plastic posts including ones that you can properly terminate PVC or UF directly into. They have a website www.aifittings.com, you can check them out there. The link that DCL posted is the one I was thinking about.
[ November 18, 2003, 07:28 AM: Message edited by: goldstar ]
Thanks to all...this is what I was looking for! Ross- Status