LED Cabinet Lights

[360Youth]

I see the periodic post on what type of cabinet lights forum members prefer so I thought I would post this some pics of a recently finshed (and still ongoing :roll home. I found these mainly for the stairwell, but found they worked in the upper cabinets and some of the under cabinet locations. I have about 50 of them throughout the house. It took some getting used to with a couple of calls to the help desk, but the end result came out pretty well, considering the decorator pretty much left it up to me to find something to work with a cabinet I had not yet seen.

 

[George Stolz]

Looks pretty sweet!

Did you have to daisy chain a bunch of these through the wall? The cut sheet seems to indicate that cutting the molex connector off the light is prohibited.

 

[360Youth]

Looks pretty sweet!

Did you have to daisy chain a bunch of these through the wall? The cut sheet seems to indicate that cutting the molex connector off the light is prohibited.

Most of the cabinet runs are chained. The stairwell lights are HR'd to a single transformer, as are a few of the cabinet lights.

 

[Sierrasparky]

Looks pretty sweet!

Did you have to daisy chain a bunch of these through the wall? The cut sheet seems to indicate that cutting the molex connector off the light is prohibited.

If you read further it has applications to where you can cut the molex connector. I bet the reason they do not want you to is because of polarity.