LED Puck

[steve_p]

Hi,

I am working on a remodel in which the contractor placed faux beams throughout the house.

These are 2X6 Douglas fir, just for esthetics.

Now he was lights installed in the beams, swivel no less.

Anyone know of a dimmable LED puck or mini can that would be rated for direct contact with the wood, along with insulation above?

Also, in the living room the ceilings are 10' - 12' high.

This is all "old work"

Thanks for any help.

 

[greenspark1]

Not offhand. You could use some sort of MR16 type decorative fixture and then use LED heads instead of halogen.

Otherwise battery powered http://www.smarthome.com/4617W/Sylvania-DOT-it-LED-Swivel-Light-White-36085/p.aspx

 

[DTLight]

One of the Juno 2" low voltage lights?

http://www.junolightinggroup.com/product_index_results.asp?ln=4&sub=16&sel1=31&sel2=328&sel3=200&brand=1&mid=2

Hopefully one of the suggested dimmers for the Juno TL602E power supply would work.

 

[Fulthrotl]

Hi,

I am working on a remodel in which the contractor placed faux beams throughout the house.

These are 2X6 Douglas fir, just for esthetics.

Now he was lights installed in the beams, swivel no less.

Anyone know of a dimmable LED puck or mini can that would be rated for direct contact with the wood, along with insulation above?

Also, in the living room the ceilings are 10' - 12' high.

This is all "old work"

Thanks for any help.

i'd look for a 12 volt led case light... solves the UL thingie...

http://www.ebay.com/itm/12V-70MM-LE...tchen-Under-Cabinet-Lamp-Warm-W-/251397212856

those are pretty cheezie, but something like that might be a solution....