rippledipple
Member
- Location
- New Jersey
- Occupation
- Electrical contractor
I'm waiting on a price on a 4' led stripe (2) and ballast to retrofit a 4' 2 lite flour. fist. Does anyone know what this would run,approx??
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
LED
- Thread starter rippledipple
- Start date
- Status
- Not open for further replies.
I'm waiting on a price on a 4' led stripe (2) and ballast to retrofit a 4' 2 lite flour. fist. Does anyone know what this would run,approx??
Be more specific so I can answer your question. What manf and model?? Attach a cut sheet or pic if possible. 240v or 277v?
ServiceCall
Member
- Location
- South Daytona
4' LED lamp runs $13 at a local supplier. No ballast required (remove existing) line voltage gets wired to each of the tombstones. Takes all of 10-12 minutes, depending on height.
rippledipple
Member
- Location
- New Jersey
- Occupation
- Electrical contractor
LED
ZLED Lighting RKT2418M-(30/40/50) thanksBe more specific so I can answer your question. What manf and model?? Attach a cut sheet or pic if possible. 240v or 277v?
rippledipple
Member
- Location
- New Jersey
- Occupation
- Electrical contractor
LED
120vBe more specific so I can answer your question. What manf and model?? Attach a cut sheet or pic if possible. 240v or 277v?
- Status
- Not open for further replies.