Legrand Cordmate (wiremold) for bell wiring

Status
Not open for further replies.

Kimura

Member
Location
Delaware
Am I going to have issues using this to protect bell wiring from physical damage ?

Background: Customer has a request for a doorbell on side of their residence. Transformer is installed in the garage ceiling and the bell wiring is to be run along the ceiling, down the wall and through exterior wall.

The walls are populated with alarm panels and various switches , so this is the only thing that would fit

comments? Suggestions ?
 

LarryFine

Master Electrician Electric Contractor Richmond VA
Location
Henrico County, VA
Occupation
Electrical Contractor
Pics?

A narrow channel is fine, and often looks better run top to bottom than cutting of the empty portion.
 

Kimura

Member
Location
Delaware
Pics attached. Sorry they are sideways

The part I’m concerned about is that it exits the exterior wall exposed. Anyway to rectify this?

I was not the original installer
 

Attachments

  • E7D95961-211C-40F8-95CD-9942A27C3651.jpeg
    E7D95961-211C-40F8-95CD-9942A27C3651.jpeg
    63 KB · Views: 17
  • 02D52709-D105-45C7-A0A9-9FDC3C30B27D.jpeg
    02D52709-D105-45C7-A0A9-9FDC3C30B27D.jpeg
    62.1 KB · Views: 17

McLintock

Senior Member
Location
USA
Occupation
Electrician
So, do they know about wireless door bells?


“ shoot low boys their riding shetland ponies”
 
Status
Not open for further replies.
Top