lesson in 12 volt please

[cino72]

I would like to place a led IR light down at my driveway gate. I have a 12 volt battery that's maintained by a battery tender. if i purchase one of the cheap ir floods that is 12 volt and cost about 10 bucks how can i connect it correctly to the 12 volt battery. I know basic electrical but when it comes to not using a supplied adapter to make a connection its out of my knowledge range.
thanks

its a sealed 35amp hr battery and the light will only be on at night
this is what I was looking at purchasing
www.amazon.com/CMVision-IR30-WideAngle-IR-Illuminator/dp/B001P2E4U4/

 

[rbalex]

Based on info from your profile:
I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the top right corner of the post.