Levinton IPHS5-1LW install

[Ben 2021]

I have 4 neutral connected together and trying to install humidity sensor switch by Levinton. Instructions says that I have to use a neutral and the device has ground, line, load and neutral screws. Current switch has line and load connected. Can I pig tail a neutral wire from the group of neutral wires (same for ground) and connect it to the device and plug the line and load from the current switch set up. Would that work?

https://www.leviton.com/en/products/iphs5-1lw​

 

[Little Bill]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.